Connecting The Appliance; Getting To Know Your Appliance - Siemens KG series N Instructions For Use Manual

en
Connecting
the appliance
After installing the appliance, wait at least
1 hour until the appliance starts up.
During transportation the oil in the
compressor may have flowed into the
refrigeration system.
Before switching on the appliance for
the first time, clean the interior of the
appliance (see chapter Cleaning).
The socket should be freely accessible.
Connect the appliance only to
220 240 V/50 Hz alternating current via
a correctly installed earthed socket.
The socket must be fused with a 10 A
to 16 A fuse.
If the appliance is to be operated in
a non European country, check on
the rating plate whether the indicated
voltage and current type correspond
to the values of your mains supply.
The rating plate is situated in the bottom
left hand side of the appliance. The power
cord may be replaced by a technician
only.
Warning
!
Never connect the appliance to electronic
energy saver plugs or to power inverters
which convert the direct current to 230 V
alternating current (e.g. solar equipment,
power supplies on ships).
22
Getting to know
your appliance
Please fold out the illustrated last page.
These operating instructions apply to
several models.
The diagrams may differ.
Fig. 1
* not all models
1 7 Fascia
8 On/Off switch
9 Light switch
10 Interior light
11 Air outlet opening
12 Bottle shelf *
13 Shelves in the refrigerator
compartment
14 Vegetable container
15 Chiller compartment
16 Ice cube maker/Pizza box *
17 Freezer drawer
18 Freezer shelf
19 Height adjustable feet
20 Egg rack
21 Butter and cheese compartment *
22 Activated carbon filters