Installing The Appliance; Preparing The Appliance For The First Time; Connecting The Appliance To The Electricity Supply; Familiarising Yourself With Your Appliance - Siemens KI42L Series Information For Use

Over-and-under and side-by-side
installation
If you want to install 2 refrigerating
appliances one over the other or side
by side, you must maintain a clear-
ance of at least 150 mm between the
appliances. Selected appliances can
be installed without a minimum clear-
ance. Ask your dealer or kitchen
planner about this.
4.3 Installing the appliance
Install the appliance in accordance
▶
with the enclosed installation in-
structions.
4.4 Preparing the appliance
for the first time
Remove the informative material.
1.
Remove the protective foil and
2.
transit bolts, e.g. remove the ad-
hesive strips and carton.
Clean the appliance for the first
3.
time. → Page 38
4.5 Connecting the appliance
to the electricity supply
Insert the non-heating appliance
1.
plug of the power cable into the

appliance.

Insert the mains plug of the appli-
2.
ance's power cable in a socket
nearby.
The connection data of the appli-
ance can be found on the rating
plate. → Fig.
Check the mains plug is inserted
3.
properly.
The appliance is now ready for
a
use.
/
5
1
Familiarising yourself with your appliance en

Familiarising yourself with your appliance

5 Familiarising yourself
with your appliance
Familiarising yourself with your appliance
5.1 Appliance
You can find an overview of the parts
of your appliance here.
→ Fig.
1
Control panel → Page 31
1
Freezer compartment
2
→ Page 35
Bottle shelf → Page 32
3
Fruit and vegetable container
4
with humidity control
→ Page 32
Rating plate → Page 43
5
Butter and cheese compart-
6
ment → Page 33
Lighting
7
Door storage compartment
8
for large bottles → Page 33
Note: Deviations between your appli-
ance and the diagrams may differ
with regard to their features and size.
5.2 Control panel
You can use the control panel to con-
figure all functions of your appliance
and to obtain information about the
operating status.
→ Fig.
2
super switches the Super
1
function on or off.
sets the temperature of the
2
refrigerator compartment.
lights up when the alarm is
3
switched on.
31