Table of Contents
Advertisement
Niche width
An inside niche width of at least
600 mm is required for the appli-
ance.
Over-and-under and side-by-side
installation
If you want to install 2 refrigerating
appliances one over the other or side
by side, you must maintain a clear-
ance of at least 150 mm between the
appliances. Selected appliances can
be installed without a minimum clear-
ance. Ask your dealer or kitchen
planner about this.
4.3 Installing the appliance
WARNING
Risk of electric shock!
Liquid in the control elements may be
dangerous.
Always install the enclosed niche
▶
cover in accordance with the en-
closed installation instructions.
Install the appliance in accordance
▶
with the enclosed installation in-
structions.
4.4 Preparing the appliance
for the first time
Remove the informative material.
1.
Remove the protective foil and
2.
transit bolts, e.g. remove the ad-
hesive strips and carton.
Clean the appliance for the first
3.
time. → Page 22
4.5 Connecting the appliance
to the electricity supply
Insert the non-heating appliance
1.
plug of the power cable into the
appliance.
Installation and connection en
Insert the mains plug of the appli-
2.
ance's power cable in a socket
nearby.
The connection data of the appli-
ance can be found on the rating
plate. → "Appliance", Fig.
Page 13
Check the mains plug is inserted
3.
properly.
The appliance is now ready for
a
use.
/
,
3
1
11
Advertisement
Table of Contents
