Switching On The Appliance; Selecting The Temperature - Siemens KG series N Instructions For Use Manual

Hide thumbs Also See for KG series N:
Table of Contents

Advertisement

en
Switching on the
appliance
Press the On/Off button. Fig. 1/8
A warning signal sounds and alarm button
flashes.
Press the alarm" button. Fig. 2/3
The warning signal switches off.
The alarm button remains lit until the set
freezer compartment temperature has
been reached.
If the door is open, the interior light in the
refrigerator compartment is lit up.
The factory has recommended
the following temperatures:
Refrigerator compartment:
Freezer compartment:
Operating tips
S The fully automatic Nofrost system
keeps the freezer compartment and
refrigerator compartment free of ice.
Defrosting is no required.
S The sides of the housing are sometimes
heated slightly. This prevents conden
sation in the area of the door seal.
S If you cannot open the freezer compart
ment door immediately after closing it,
wait 2 3 minutes until the partial
vacuum has equalised.
24
Selecting the
temperature
Fig. 2
Refrigeratorcompartment
(can be selected from +2 °C to +8 °C)
Keep pressing temperature selection
button 2 until the required refrigerator
compartment temperature is set.
The value last selected is stored.
The set temperature is indicated on
display 7.
We recommend a setting of +4 °C.
Perishable food should not be stored
warmer than +4 °C.
+4 °C
-18 °C
Freezer compartment
(can be selected from -16 °C to -24 °C)
Keep pressing temperature selection
button 1 until the required freezer
compartment temperature is set.
The value last selected is stored.
The set temperature is indicated on
display 5.
We recommend a setting of -18 °C in the
freezer compartment.

Advertisement

Table of Contents
loading

Table of Contents