Table of Contents
Advertisement
NLGetting to know your device
niche width
The appliance requires a furniture
niche with an internal width of at least
560 mm.
Side-by-side arrangement
If you want to set up 2 devices next
to each other, you must maintain a
distance of at least 150 mm between
the devices.
4.3 Mounting the device
▶ Install the device in accordance with the
installation instructions supplied.
4.4 Preparing the device for the
first use
Remove the information material.
1.
Remove the protective film and transport
2.
safeguards, eg adhesive strips and
cardboard.
Cleaning the device for the first
3.
time. Page 94
4.5 Connecting the appliance
electrically
Connect the appliance plug of the
1.
connecting cable to the
appliance.
Insert the mains plug of the mains
2.
cable of the device into a socket
in the vicinity of the device.
The connection data of the device
can be found on the type plate.
→ fig. †
1
3
Check the mains plug for tightness.
3.
aThe appliance is now ready for use
use.
88
5
Getting to know your
device
5.1 Device
Here you will find an overview of the
components of your device.
→ Fig.
1
a
refrigerator compartment
B
Freezer
1
Control panel
2
Fruit and vegetable drawer
with humidity control
→ Page 89
3
Nameplate
4
freezer drawer
5
Bottle rack → Page 89
6
Door rack for large bottles
Remark:Differences between your
device and the images may be based
on equipment and size.
5.2 Control panel
You can set all functions of your
device and obtain information about
the operating status via the control
panel.
→ Fig.
2
1
sets the temperature of the refrigerator
compartment.
2
lights up when the
Super function is on.
3
Shows the set temperature of the
refrigerator compartment in °C.
Advertisement
Table of Contents
