Chapter 2
Hardware Overview of the NI 783xR
NI 783xR User Manual
SW1, SW2, SW3
Figure 2-12. Switch Location on the NI PCI-783xR
ON
1 2 3
a. Normal Operation (Default)
Complete the following steps to prevent a VI stored in Flash memory from
loading to the FPGA:
1.
Power off and unplug the PXI/CompactPCI chassis or PCI computer.
2.
Remove the NI 783xR from the PXI/CompactPCI chassis or PCI
computer.
3.
Move SW1 to the ON position, as shown in Figure 2-13b.
b. Prevent VI From Loading
Figure 2-13. Switch Settings
2-22
ON
1 2 3
ni.com