Appendix A
Specifications
Clean the NI PXI-8360 and NI PCIe-8360 with a soft nonmetallic brush. Make
Caution
sure that the device is completely dry and free from contaminants before returning it to
service.
Note
For full EMC compliance, operate this device with shielded cabling. In addition, all
covers and filler panels must be installed. Refer to the Declaration of Conformity (DoC)
for this product for any additional regulatory compliance information. To obtain the DoC
for this product, visit
and click the appropriate link in the Certification column.
Safety
Note
For UL and other safety certifications, refer to the product label or visit
ni.com/certification
appropriate link in the Certification column.
Electromagnetic Compatibility
For EMC compliance, operate this device with shielded cabling.
Note
CE Compliance
MXI-Express Series User Manual
ni.com/certification
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1
•
CAN/CSA-C22.2 No. 61010-1
, search by model number or product line, and click the
Emissions................................................EN 55011 Class A at 10 m.
Immunity ................................................EN 61326:1997 + A2:2001,
CE, C-Tick, and FCC Part 15 (Class A) Compliant
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety)..............73/23/EEC
Electromagnetic Compatibility
Directive (EMC) .....................................89/336/EEC
, search by model number or product line,
FCC Part 15A above 1 GHz
Table 1
A-4
ni.com