Table of Contents
Advertisement
Environment
The NI 8234 is intended for indoor use only.
Ambient temperature range ...................................0 to 50 °C
Operating relative humidity ...................................10 to 90%, noncondensing
Pollution Degree ....................................................2
Caution
Do not use the NI 8234 for connection to signals within Measurement Categories II, III,
or IV.
Approved at altitudes up to 2,000 m.
Storage Environment
Ambient temperature range ...................................–40 to 70 °C
Relative humidity...................................................10 to 90%, noncondensing
Safety
This product is designed to meet the requirements of the following standards of safety:
•
IEC 60950-1, EN 60950-01
•
UL 60950-1, CSA 60950-1
Electromagnetic Compatibility
This product is designed to meet the requirements of the following standards of EMC for electrical
equipment for measurement, control, and laboratory use:
•
EN 61326 EMC requirements; Minimum Immunity
•
EN 55011 Emissions; Group 1, Class A
•
CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
Note
For EMC compliance, operate this device to product documentation.
CE Compliance
This product meets the essential requirements of applicable European Directives, as amended for
CE marking, as follows:
•
73/23/EEC; Low-Voltage Directive (safety)
•
89/336/EEC; Electromagnetic Compatibility Directive (EMC)
Note
Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product, visit
certification
the Certification column.
Getting Started with the NI 8234
, search by model number or product line, and click the appropriate link in
6
ni.com/
ni.com
Advertisement
Table of Contents
