Electromagnetic Compatibility; Ce Compliance; Product Certifications And Declarations; Environmental Management - National Instruments NI-9866 Getting Started

Operating shock

Electromagnetic Compatibility

This product meets the requirements of the following EMC standards for electrical
equipment for measurement, control, and laboratory use:
EN 61326 (IEC 61326): Class A emissions; Basic immunity
■
EN 55011 (CISPR 11): Group 1, Class A emissions
■
AS/NZS CISPR 11: Group 1, Class A emissions
■
FCC 47 CFR Part 15B: Class A emissions
■
ICES-001: Class A emissions
■
Note
For the standards applied to assess the EMC of this product, refer to
the Online Product Certification section.
Note
For EMC compliance, operate this product according to the
documentation.

CE Compliance

2014/34/EU; Potentially Explosive Atmospheres (ATEX)
■

Product Certifications and Declarations

Refer to the product Declaration of Conformity (DoC) for additional regulatory
compliance information. To obtain product certifications and the DoC for NI
products, visit ni.com/product-certifications, search by model number, and click the
appropriate link.

Environmental Management

NI is committed to designing and manufacturing products in an environmentally
responsible manner. NI recognizes that eliminating certain hazardous substances
from our products is beneficial to the environment and to NI customers.
10
ni.com
30 g, 11 ms half sine; 50 g, 3 ms half sine; 18 shocks at 6 orientations
NI-9866 Getting Started