National Instruments FieldPoint cFP-RTD-122 Operating Instructions Manual page 13

Maximum altitude............................. 2,000 m; at higher altitudes
Pollution Degree .............................. 2
Shock and Vibration
These specifications apply only to the cFP-RTD-122.
NI recommends Compact FieldPoint if your application is subject
to shock and vibration.
Operating vibration, random
(IEC 60068-2-64).............................. 10–500 Hz, 5 g
Operating vibration, sinusoidal
(IEC 60068-2-6)................................ 10–500 Hz, 5 g
Operating shock
(IEC 60068-2-27).............................. 50 g, 3 ms half sine,
Safety
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement,
control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 3121-1, UL 61010C-1
• CAN/CSA C22.2 No. 1010.1
For UL, hazardous location, and other safety certifications, refer to
the product label or to
Electromagnetic Compatibility
CE, C-Tick, and FCC Part 15 (Class A) Compliant
Emissions.......................................... EN 55011 Class A at 10 m
Immunity........................................... EN 61326:1997 A2:2001,
Note
shielded cabling.
© National Instruments Corp.
ni.com
For EMC compliance, operate this device with
the isolation voltage ratings
must be lowered
18 shocks at 6 orientations;
30 g, 11 ms half sine,
18 shocks at 6 orientations
.
FCC Part 15A above 1 GHz
Table 1
13
rms
FP-RTD-122 and cFP-RTD-122