Table of Contents
Advertisement
Available languages
Available languages
17026951_0709 SB_Bauk.book Seite 12 Montag, 13. Juli 2009 1:54 13
ENGLISH
ENG
Original instructions
Dear Customer,
Thank you for the trust you have placed in us by buying a Metabo power tool. Each Metabo power tool
is carefully tested and subject to strict quality controls by Metabo's quality assurance. Nevertheless, the
service life of a power tool depends to a great extent on you. Please observe the information contained
in these instructions and the enclosed documentation. The more carefully you treat your Metabo power
tool, the longer it will provide dependable service.
Contents
1 Declaration of Conformity
2 Specified Conditions of Use
3 General Safety Information
4 Special Safety Information
8.5 Changing between drilling/impact
drilling
8.12 Torque limiter
1 Declaration of Conformity
We, being solely responsible, hereby declare that
this product conforms to the standards and
directives specified on page 2.
2 Specified Conditions of Use
The machine is suitable for non-impact drilling into
metal, wood, plastic and similar materials and for
impact drilling into concrete, stone and other such
materials. Furthermore the machine is suitable for
tapping and screw driving (not SB 660).
12
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
3 General Safety Information
WARNING - Reading the operating
instructions will reduce the risk
of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety warn-
ings and instructions may result in electric shock,
fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Before using the power tool, carefully read through
and familiarise yourself with all the enclosed safety
information and the Operating Instructions. Keep
all enclosed documentation for future reference,
and pass on your power tool only together with this
documentation.
4 Special Safety Information
For your own protection and the
protection of your power tool, observe
the passages marked by this symbol!
Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
Use auxiliary handle, if supplied with the tool.
Loss of control can cause personal injury.
Hold power tool by insulated gripping surfaces,
when performing an operation where the
cutting accessory may contact hidden wiring or
its own cord. Cutting accessory contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
Pull the plug out of the plug socket before any
adjustments or servicing are performed.
Avoid inadvertent starts by always unlocking the
switch when the plug is removed from the mains
- Quick Links:
- Eng Original Instructions
- English
Hide quick links:
Advertisement
Chapters
Table of Contents
