Table of Contents
Advertisement
Electromagnetic Compatibility
The NI USB-6008/6009 may experience temporary variations in analog input
Note
readings when exposed to radiated and conducted RF noise. The device returns to normal
operation after RF exposure is removed.
Note
For EMC compliance, operate this device according to product documentation.
CE Compliance
Note
Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product, visit
certification
in the Certification column.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers
center. For more information about WEEE recycling centers and National Instruments
WEEE initiatives, visit
NI USB-6008/6009 User Guide and Specifications
Storage temperature
(IEC 60068-2-1 and IEC 60068-2-2)......–40 to 85 °C
Storage humidity
(IEC 60068-2-56) ..................................5 to 90% RH, noncondensing
Pollution Degree (IEC 60664) ................2
This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement, control,
and laboratory use:
•
EN 61326 EMC requirements; Minimum Immunity
•
EN 55011 Emissions; Group 1, Class A
•
CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
•
73/23/EEC; Low-Voltage Directive (safety)
•
89/336/EEC; Electromagnetic Compatibility Directive (EMC)
, search by model number or product line, and click the appropriate link
At the end of their life cycle, all products must be sent to a WEEE recycling
ni.com/environment/weee.htm
26
ni.com/
.
ni.com
Advertisement
Table of Contents
