Tools; Tools Main Menu; Information; Factory Setting - Philips DTR3000 User Manual

8 Tools

Tools main menu

Use this menu, you can see the current informations of this Set
Top Box,Load Factory Setting, Update S/W and Remove USB
device safely.
1
Press the "MENU" button to enter main menu.
2 Press "UP" or " DOWN " button to highlight "Tools", press
"RIGHT" button to enter the Tools menu.
3
Press "UP" or "DOWN" cursor button to highlight the desired
item and press "OK" button to enter the sub-menu.
4
Press "EXIT" button to exit.
Tools

Information

Load Factory Setting
Software upgrade by OTA
Software upgrade by USB

Remove USB device safely

Information
This menu can display Hardware Moudule, Hardware Version,
Software Moudule, Software Version of this Set Top Box and
date.
1
In "Tools" menu, select "Information", press "OK" button to
open information window.
2
Press "EXIT" button to exit.
Information
HW_Module:
HW_Version:
SW_Module:
SW_Version:
Date:

Factory Setting

This menu allows you to re-set the Set-top box back to factory
settings,clear all existed channels.
1
In the "Tools" menu, select "Load Factory Setting", press
"OK" button.
You are asked to input a password(the default password
is"0044" or "3327").
2
A confirmation window is displayed.
Select "Yes" to return back to factory settings and clear all
channels.
Select "No" to cancel back to factory settings.
20
M3821
MC6583-VER1.0
HDT2-148A
DVB-T2 HDV1.0.2
May14 2015
3
Press "EXIT" button to exit .
Load Factory Setting
This operation will delete all channels and settings and
the system will reboot to the first time installation,
continue?
Yes
Software Update
We offer the functions for user to upgrade software version by
OTA or by USB .
1 Enter "Tools" menu, select "Software upgrade by OTA" or
"Software upgrade by USB", press "OK" button, Software
Upgrade menu is shown.
2
Press cursor button to select the desired item, then highlight
"Start" and press "OK" button to start upgrade.
3
Press "EXIT" button to exit.
Tools
Information
Load Factory Setting
Software upgrade by OTA
Software upgrade by USB
Remove USB device safely
Remove USB device safely
This menu allows you to remove USB device safely.
1
In "Tools" menu, select "Remove USB device safely",
2
Press "OK" button to confirm. Then a window is displayed.
3
Press "OK" button again.
Tools
Information
Load Factory Setting
S/W Update by OTA
Upgrade By USB
Remove
Remove USB device safely
No
Disk Remove
USB Disk A-3 GB
OK Cancel