Network Settings; Basic Settings - Siemens DOME COLOUR CFMC1315-LP Configuration Manual

7.2

Network Settings

7.2.1

Basic Settings

Siemens Building Technologies
Fire Safety & Security Products
You can setup your camera basic setting, DDNS, and FTP server by selecting
Network Settings in the Configuration menu..
Basic
Camera Name
Camera Name Enable
Network
DHCP
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Port
Stream1-Stream2,
cropping1-5:
UPnP
AUDIO output
Input your camera name here. The default name is "nwcam05".
The IP address is automatically obtained when you select ON;
otherwise, select OFF to manually setup the network setting.
Input your IP address here when you select DHCP off.
Please use default number: 255.255.255.0
leave blank as default setting. It is not necessary to enter Default
Gateway if it is not used.
Ask your Network Administrator for Default Gateway information.
(same as above)
(same as above)
We recommend to use the default, if need to change please check
with system administrator.
If this item is selected "ON", the camera can be detected automatically
by PC. No necessary to have IpFinder installed.
If this item is selected "ON", a voice message of camera's IP address
can be delivered to external speaker via Audio output port.
Configuration
27
01.2009