Install the camera
6.2.2.3 LENS LEVEL
6.2.2.4 WB MODE
6.2.2.5 GAIN
20
Siemens Building Technologies
Fire Safety & Security Products
Setting the lens level (exposure level). Move the
cursor to the position as shown in the figure.
Push ENTER and use the UP/ DOWN button to
select 1 - 10.
Selection and setting of the white balance sys-
tem (AUTO and manual mode).
Move the cursor to the position as shown in the
figure.
Using UP/ DOWN button to choose ATW or
manual mode.
AUTO
TTL auto trace white balance algorithm is de-
signed to implement a perfect color reproduc-
tion. Color temperature ranges are depending
on preset mode.
Manual mode
Press the ENTER button to enter manual
mode. To obtain correct manual white balance
adjust the R and B (red& blue) values by
press UP, DOWN button. Press LEFT, RIGHT
button to exit move cursor between R&B, and
press ENTER button to exit.
Adjust max. GAIN: 0 – 30 dB.
Move the cursor to the position as shown in
figure.
Using UP/ DOWN button, choose gain value
from 0 dB to 30 dB.
CAMERA SETUP
EXPOSURE ALC
SHUTTER OFF
LENS LEVEL 5
WB MODE AUTO
GAIN 24
GAMMA 0.45
APERTURE MID
WD LEVEL 5
BACK
CAMERA SETUP
EXPOSURE ALC
SHUTTER OFF
LENS LEVEL 5
WB MODE AUTO
GAIN 24
GAMMA 0.45
APERTURE MID
WD LEVEL 5
BACK
CAMERA SETUP
EXPOSURE ALC
SHUTTER OFF
LENS LEVEL 5
WB MODE AUTO
GAIN 24
GAMMA 0.45
APERTURE MID
WD LEVEL 5
BACK
08.2006