Table of Contents
Advertisement
A small amount of sand or cat litter may be placed in
bottom of grease tray to absorb the grease. Check the
grease tray frequently, don't allow excess grease to
accumulate and overflow out of the grease tray.
SIDE BURNER CLEANING:
Clean the exterior of the burner with a wire brush. Clear
any clogged burner ports with a straightened paper clip.
Never enlarge the burner ports. Never use a wooden
toothpick as it may break off the clog the port.
LIGHTING ILLUSTRATIONS
Main & Side Burner Lighting Illustration
Step 1. Make sure the Lid is open
Step 2. Push and turn one of main or side burner knobs to HI position
Step 3. You may need 3 or 4 trials to light the burner. After the burner is lit, adjust the
knob as desired
STAINLESS STEEL FOR SIDE BURNER:
There are many different stainless steel cleaners
available. Always use the mildest cleaning procedure
first, scrubbing in the direction of the grain. Do not use
steel wool as it will scratch the surface. To touch up
noticeable scratches in the stainless steel, sand very
lightly with dry 100 grit emery paper in the direction of
the grain.
SIDE BURNER GRATE:
The top burner grate is stainless steel. To avoid burns
do not clean a hot grate. They may be wiped while in
place with hot, soapy water, rinsed and wiped dry.
Never immerse a hot grate in water.
17
Advertisement
Table of Contents
