Multiple Battery Charging - Napa 85-2500 Instruction Manual

Professional battery charger and starter 6 /12 v, 200/50/30 /10 a, motive power
Hide thumbs Also See for 85-2500:
Table of Contents

Advertisement

Available languages

Available languages

120 minutes + 15.5 = 75.5 amp hours
2
(75.5 amp hours) x (0.75) = time = 1.9 hours
30-amp charge rate
Then:
(1.9 hours) x (recharge factor of 1.25) = 2.38 hours or 142 minutes
recharge time.
12.

MULTIPLE BATTERY CHARGING

Batteries of the voltage may be connected in parallel for maintenance
charging. Charge time increases in proportion to the number of batteries.
Rate of charge decreases in the same proportion.
Example: Charging 2 batteries in parallel will take 2 times longer; each
battery receives 1/2 the amount of charge showing on the ammeter. Thus,
if the ammeter shows a 30-amp charge, each battery will get a 15-amp
charge (when batteries have the same rating, same state of charge, etc.).
13.
ASSEMBLY INSTRUCTIONS
CAUTION: The charger must be fully assembled before operating.
Refer to the illustration on the next page:
1. Attach handle to the unit with screws provided. Refer to drawing.
2. Remove backing and attach the four rubber feet on the bottom.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents