Charger Features And Controls; Multiple Battery Charging; Battery Type Switch - Napa 85-510 Instruction Manual

0.5 CAUTION - Do not leave Manual chargers unattended.
0.6 CAUTION: If at any time the battery gets hot (above 25°F (52°C)) or acid
comes out of vent caps, STOP charging.
0.7 To maximize battery life - Let automatic chargers complete charging.
11.

MULTIPLE BATTERY CHARGING

Batteries of the same voltage may be connected in parallel for
maintenance charging. Charge time increases in proportion to the number
of batteries. Rate of charge decreases in the same proportion.
Example: Charging 2 batteries in parallel will take 2 times longer; each
battery receives /2 the amount of charge showing on the ammeter. Thus,
if the ammeter shows a 30-amp charge, each battery will get a 5-amp
charge (when batteries have the same rating, same state of charge, etc.).
12.

CHARGER FEATURES AND CONTROLS

2. BATTERY SIZE SWITCH
Use this switch button to set the battery size to one of the following:
2A SMALL: Intended for charging small batteries such as those
commonly used in garden tractors, snow mobiles and motorcycles. The
2A rate is not intended to be used as a trickle charger for larger batteries.
6A MEDIUM or 10A LARGE: Use for charging automotive batteries,
marine batteries, and deep cycle batteries. Not intended for industrial
applications.

2.2 BATTERY TYPE SWITCH

Use this switch button to set the type of battery to be charged to one of
the following.
0
• •