Other Useful Information (Cont.)
Drain pump maintenance
We recommend that you clean the drain pump filter regularly (at least once a month) to
avoid blockages created by bobby pins, coins and excess lint.
Proceed as follows:
1.
Disconnect the washer from the power source.
2.
If necessary, wait until the water has cooled down.
3.
Place a container underneath the pump opening to collect any spillage (see
below, left).
4.
Turn the filter cap anticlockwise to take it out gently (see below, right).
5.
Remove any objects from the filter by flushing it (see below, left). Always keep a
rag nearby to dry up spillage of water when removing the pump filter.
6.
Put the cap back and place the filter back in its seat (see below, right).
Filter
22