Related Manuals for Akai XQB100-Y1066S
Summary of Contents for Akai XQB100-Y1066S
-
Page 1: Washing Machine
9kg Top Load Washing Machine XQB100-Y1066S Instruction Manual AFTER SALES SUPPORT NZ: 0800 836 761 N13275... -
Page 2: General Safety Instructions
General Safety Instructions Warning This heading indicates that there is a serious risk of injury if you do not adhere to the warning(s). This heading indicates that care should be taken to Caution avoid injury to persons or damage to property. A tick in a circle accompanies a measure or action that you should do or follow. -
Page 3: Installation
General Safety Instructions (Cont.) Installation • Install the washing machine on a flat surface to avoid overturning during use. • If the machine must be placed on carpet, make sure the ventilation openings in the base are not obstructed. • Connect the washing machine to the water mains using new hose sets. Do not reuse old hose sets. - Page 4 General Safety Instructions (Cont.) Warnings Do not let children climb into the Do not wash clothes that have washing machine or peer into the residue of any flammable rotating spin barrel. materials. Do not use the appliance if the Regularly clean the power plug power cord or plug is damaged to remove dust and dirt and to avoid an electric shock, short...
- Page 5 General Safety Instructions (Cont.) To avoid electric shock, fire and Do not pull out or insert the plug malfunction, do not install this with wet hands to avoid electric machine shock. in a damp place. No wet hands No dampness Cautions Do not allow children to lay or sit Ensure the water inlet hoses...
-
Page 6: Product Overview
Product Overview Accessories included 1 Water supply hoses 10 Detergent tray 2 Lid 11 Pulsator 3 Level indicator 12 Rollers (one on each back corner) 4 Softener dispenser 13 Handle (one on each side) 5 Lint filter 14 Hot water supply hose 6 Wash/spin tub 15 Cold water supply hose 7 Control panel... -
Page 7: Getting Started: Installation
Getting Started: Installation Unpacking • Unpack the appliance but keep all packaging materials until you have made sure your new washing machine is undamaged and in good working order. Plastic wrapping can be a suffocation hazard for babies and young children, so ensure all packaging materials are out of their reach. -
Page 8: Connecting The Water Inlet Hoses
Getting Started: Installation (Cont.) Connecting the water inlet hoses Install the water inlet hoses to your hot and cold water taps, following the instructions below. • Check and ensure that the sealing washers are firmly in place. • Attach the straight end of the hose to your water taps. Make sure to attach the hot water supply hose (with red markings) to the hot water tap and the cold water supply hose (with blue markings) to the cold water tap. - Page 9 Getting Started: Installation (Cont.) CAUTION! When tightening the clamping nut, take care not to damage the water inlet valve joint. Apply force evenly and do not twist the water inlet valve. CAUTION! Use only the new (supplied) hoses with your new appliance. Do not use a hose from an existing machine, or one that has been used previously.
-
Page 10: Installing The Drain Hose
Getting Started: Installation (Cont.) Installing the drain hose • Pinching the two bands of the clamp on the drain hose, connect it to the drain pump at the back of the washer (see the photo below, left). • Pull the drain hose upward and affix it to the hose clip at the back of the washer, as illustrated below, right. - Page 11 Getting Started: Installation (Cont.) Using the rollers The washing machine is equipped with two rollers at the back that you can use to move the machine more easily. Tilt the washing machine by about 30 degrees and push forward, or pull backward, while holding the machine securely on both sides with your hands, as illustrated below.
-
Page 12: Features
Features The control panel Detergent indication Time and preset indicators • These indicate how This indicator shows the This indicator shows during much powder detergent presetting when the washing will remaining time during washing. to use. be finished. • See ‘Detergent and load recommendations’, page 15, for details. - Page 13 Features (Cont.) Start/pause button Rinse indication Spin indication • Press this button to start the • This indicator • This indicator washer operation. shows the number shows the spin time of rinses. (maximum spin time • During operation, press this shown is 9 minutes).
-
Page 14: Before You Start Washing
Instructions Before you start washing A Make sure the washer is stable and level. If necessary, adjust the On the back adjustable leg to stabilise the washer. B Make sure the water inlet hoses are properly installed. C Plug the machine into a nearby power point. -
Page 15: Program Selection Guide
Instructions (Cont.) Program selection guide Default settings for individual wash processes Program Suitable items Washing time * Rinse type Spin time (minutes) (minutes) NORMAL ** Normally soiled clothing 5 ~ 40 2 x Water saver rinse 5 ~ 26 and other items 4 x Shower rinse CUSTOM Dependent on the... - Page 16 Instructions (Cont.) Customising a program This washing machine is equipped with a fuzzy logic function that automatically weigh your wash load and choose certain wash cycle processes for the NORMAL, HEAVY DUTY, CUSTOM and SOFT WASH programs. You do not have to adjust them yourself, however, if you want to adjust these values yourself, proceed as follows: 1.
- Page 17 Instructions (Cont.) The blanket program Use this program for washing blankets or other bulky items. It will automatically select the highest water level (90L), but you can adjust this manually down to 62L according to the size of your bulky item(s). 1.
- Page 18 Instructions (Cont.) Preset washing (delayed start) This washing machine has a 0 24 hour preset function you can set to determine the time when the washing program will finish. (It is, in effect, similar to a ‘delayed start’ function, but you set the time you want the wash to finish rather than to start.) NOTES: * The Preset function is not available for the DELICATE program.
-
Page 19: Other Features And Functions
Instructions (Cont.) Other features and functions Hot / cold / warm water wash If this top load washing machine is connected to both a cold and a hot water tap, you can set it to use either just cold water for a cold water wash, or just hot water for a hot water wash, or both hot and cold water for a warm water wash. -
Page 20: Ultrasonic Function
Instructions (Cont.) Fuzzy logic function For certain wash programs, the machine automatically detects the weight of your wash load and selects the appropriate wash cycle processes. • For the NORMAL and HEAVY DUTY programs, the machine will automatically select the correct water power and level, wash and spin time, and rinse type. •... -
Page 21: Cleaning And Care
Other Useful Information Cleaning and care To prolong the service life of the washing machine, keep it in good condition and perform regular maintenance. For any type of cleaning and maintenance, make sure the washing machine is disconnected from the mains power supply. Cleaning the washing machine (when required) Use a soft cloth to wipe any water or dirt off the washer lid and housing. -
Page 22: Drain Pump Maintenance
Other Useful Information (Cont.) Drain pump maintenance We recommend that you clean the drain pump filter regularly (at least once a month) to avoid blockages created by bobby pins, coins and excess lint. Proceed as follows: Disconnect the washer from the power source. If necessary, wait until the water has cooled down. -
Page 23: Frequently Asked Questions
Other Useful Information (Cont.) Frequently asked questions Not all unusual incidents you may encounter with your washing machine are faults, or cause for concern. Check in the list below what issues may arise and why. Also check in the table on the following page for solutions to other common problems. The drain hose is leaking water during the first use. -
Page 24: Error Messages
Other Useful Information (Cont.) Error messages When the following problems occur, the microcomputer inside the washer will detect the abnormal condition. An electronic buzzer will sound for approximately 10 seconds, an error message will flash, as shown below, and the washer will stop operating. Type of Error Where to check... -
Page 25: Specifications And Technical Parameters
Other Useful Information (Cont.) Specifications and technical parameters Unit dimensions 60.1cm (W) x 62.6cm (D) x 98.5cm (H) Maximum weight of dry wash load Unit weight 47kg Water quantity (HIGH) 90litres Power source 230-240V, 50Hz Power consumption 450W Required water pressure 0.03MPa ~ 0.8MPa (0.3kgf/cm ~8kgf/cm Waterproof grade... - Page 26 Notes...
- Page 27 Notes (Cont.)
- Page 28 Warranty We pride ourselves on producing a range of quality home appliances that are both packed with features and completely reliable. We are so confident in our products, we back them up with a full 2 year warranty. Now you too can relax knowing that you are covered. Customer Helpline NZ: 0800 836 761 This Product is covered by 2 year warranty when accompanied by proof of purchase.