Panasonic MDF-U4186S Series Operating Instructions Manual page 10

FREEZER COMPONENTS
1. Outer door:
To open the door, grip the handle. On closing, make sure to lock the latch completely.
2. Magnetic door gasket:
Provides a tight door seal and prevents cold air leak.
3. Inner door:
Composed of separated door flaps for minimizing temperature rise when putting in and taking out
refrigerated articles. You need open only a necessary part of the flaps. Removable type for cleaning
and defrosting.
4. Key:
Turn counterclockwise to 180 degree and the outside door can be securely locked.
5. Condenser filter (behind the grille):
This filter prevents the dust from accumulating on the condenser. The dusty filter may cause failure of
refrigerating device. Clean the filter once a month. See page 21 "ROUTINE MAINTENANCE" for the
cleaning.
6. Setting position of the temperature recorder (optional part)
7. Leveling foot:
Serves to adjust the height and to settle the frame.
8. Caster:
4 casters are provided to facilitate moving of the frame.
9. Access port:
Serves as a means of leading the measuring cable from freezing room to the outside.
10. Control panel:
The temperature set key, buzzer key and alarm lamp etc. are installed on the panel.
11. Setting spot for the sensors of temperature controller and recorder:
Both the sensor of temperature controller and that of temperature recorder are set at this spot.
Be careful not to contact any refrigerated articles directly with the spot.
12. Battery switch(
This is a switch for a battery for power failure alarm. Normally, turn on this switch. Be sure to turn off
this switch if the freezer is not in operating for the long period.
13. Power supply switch (POWER):
Power all function except for remote alarm.
14. Remote alarm terminal: Used to notify an alarm condition of the unit to remote location. See
page 18 for details.
):
9