Maintenance Schedule - Land Pride ZT60i Operator's Manual

Section 5: Maintenance & Lubrication
Service at Intervals Indicated
Clean Mower, Deck & Engine Cooling System
Verify Safety Start Interlock System
Inspect Unit For Loose Hardware & Damage
Visually Inspect Tires
Check Engine Oil Level
Clean Engine Air Intake Screen
Check Fuel Level
Inspect Fuel System For Leaks
Check Blades - Sharp & Securely Fastened
Check Discharge Chute -
Make Sure It Is Properly Secured In Place
Grease Blade Spindle Bearings
Change Engine Oil & Filter (1)
Clean Cylinder & Head Fins
Check Battery Connections
Check Tire Pressure
Clean Engine Exterior (3)
Check Transaxle Oil Level
Tighten Lug Nuts On Wheels (2)
Grease Front Suspension Pivot
Grease Caster Wheel Bearings
Check Ground & Deck Belt Tension (4)
Check Transaxle For Oil Leaks (5)
Change Fuel Filter (3)
Grease Deck Lift Points & Struts (8)
Replace Spark Plugs (3)
Replace Air Cleaner Paper Element (6)
Inspect Tethered Fuel Caps (8)
Change Transaxle Oil & Filter (7) (8)
Check & Adjust Parking Brakes (8)
NOTES:
1. Initial engine oil and oil filter change is after the first 5 hours of operation. Thereafter, change engine oil and oil filter
every 50 hours of operation. Change every 25 hours when operating the engine under dusty or dirty conditions,
heavy load, high temperatures, and hot weather periods. Refer to Engine Owner's Manual.
2. Torque lug nuts initially and after first 2 hours of operation.
3. Remove cooling shrouds and clean cooling areas. Check oil cooler fins and clean as needed. Refer to Engine
Owner's Manual.
4. Inspect ground and deck belt tensions every 6 months or 100 hours and replace if worn or cracking is noticed.
Otherwise, replace every 200 hours or 2 years whichever comes first.
5. Inspect transaxles for oil leaks. Have your nearest Land Pride Service center make repairs as needed.
6. Replace air cleaner filter element if damaged, every 200 hours or every season (whichever comes first). Replace
more frequently when used in dusty conditions.
7. Initial oil and filter change is between 25 and 50 hours of operation.
Transaxle
8. X/M = Service per hours indicated in column or monthly (whichever comes first).
X/A = Service per hours indicated in column or annually (whichever comes first).
34 ZT60i & ZT72i (S/N 748110+) Accu-Z
Table of Contents

Maintenance Schedule

Every Every
25 Hrs 50 Hrs
Daily (Before each use & every 4 hours thereafter)
Daily (Before each use & every 4 hours thereafter)
X
X
®
Zero Turn Mowers 357-552M
Every Every
100 Hrs 200 Hrs
Daily (After engine has cooled.)
Daily (Before each use)
Daily (Before each use)
Daily (Before each use)
Daily (Before each use)
Daily (Before each use)
Daily (Before each use)
Daily (Before each use)
X
X
X
X
X
X
X
X
X
X
X
X/M
Every Refer to
500 Hrs Page
19
33
59
43
43
41
41
46 & 58
49
43
13 & 35
59
39
58
50
50
37
41
42
50
X
X 44
X/A 42
X/A 40
X/A 24
2/06/14