Placing Originals On The Original Glass - Toshiba E-studio 207L Operation Manual

2.HOW TO MAKE COPIES
 Placing originals on the original glass
The original glass can be used for originals such as OHP films or tracing paper, as well as plain paper, that
cannot be placed on the RADF (optional).
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with
force.
Breaking the glass could injure you.
Raise the Original Cover (optional) or the RADF (optional).
1
Raise it 60 degrees or more so that the size of the original can be detected correctly.
Place the original with its face down on the original
2
glass and align it with the left rear corner of the glass.
When you copy highly transparent originals
When you copy highly transparent originals such as OHP films
or tracing paper, place a blank sheet, which is the same size as
the original or larger, over the original.
Lower the Original Cover (optional) or the RADF (optional) carefully.
3
When it is being closed, the scanner lamp flashes to detect the original size.
2 HOW TO MAKE COPIES
Placing Originals 23