Table of Contents
Advertisement
S T E P
B Y
STEP 11: Two-Way Adjustable Reversing Sensor
Adjust the
"Reverse
Sensor" pot on the upper portion of the control board.
Alarm Sensor pot.
The level of reverse sensitivity depends on the weight of the gate
Too sensitive = if the gate stops or reverses by itself.
Not sensitive enough = if the gate hits an object and does not stop or reverse.
Do Not Touch
Alarm Sensor
Pot
Minimum
Sensitivity
Maximum Sensitivity
STEP 12: Warning placards need to be permanently mounted on BOTH sides of the gate.
NOW YOUR INSTALLATION IS COMPLETE
S T E P
I N S T A L L A T I O N
and the condition of installation.
18
Do Not Touch
Important Note!
There is a
"Heavy
Gate"
LED which will light up
when the gate is heavier
than normal. This is a
diagnostic LED and the
operator
will
still
function normally when
this indicator is on.
For Toll Free
Technical Support:
1-888-ELITE-10
3 5 4 8 3
Advertisement
Table of Contents
