Table of Contents
Advertisement
C O N F I G U R A T I O N
All "Pinch Points"
Sensor Edges
Robo Slide Specifications:
Gate Speed – 11 inch per second
Maximum Gate Length – 20 feet
Maximum Gate Weight – 800 pounds
Maximum Cycles – 70 cycles per day with Elite's Plug-In Transformer.
– Solar power cycles per day varies, Contact Elite for more Information
– Battery back-up cycles (50 cycles total)
AC Power Supply – 18 VAC 2.0 Amp Plug-In Transformer (Elite Part #
AC Power Supply Wire – 14 gauge or greater landscape lighting cable rated for direct burial and
DC Power Supply – Built-in, back-up for AC or Solar power failure only
Solar Power – Optional (Elite Part #
Be sure to read and follow all Elite's instructions before installing and operating any
Elite product. Always disconnect the gate operator's power source before repairs are
attempted. Elite Access Systems, Inc. is not responsible for improper installation or
failure to comply with local building codes.
CAUTION
A N D
MUST
have protective safety devices.
Warning Placards
Permanently Mounted
on Both Sides
Non-Pinch
of Gate
Rollers
Recommended Gate Setup Configuration
300 watts at maximum length of 1000 ft
SOLAR
3)
9
S P E C I F I C A T I O N S
3" Max. Width
(2"x 2" Screen)
Weld Physical Stops on
Both Ends of Gate Rail
A
POW-1)
Non-Pinch
Rollers
Sensor
Edges
Advertisement
Table of Contents
