Important Notice - Chamberlain The Robo Slide Instruction Manual

I M P O R T A N T
IMPORTANT! Because the coasting distance may vary due to changes in temperature, Elite
does NOT recommend the installation of a stop or catch post in front of the gates path. To do
so will cause the gate to hit the post in certain instances.
Incorrect
Elite only recommends installation of catch rollers on the side of a catch post or wall with a
minimal distance of half an inch between the rollers and gate. Also when fully open the end of
the sliding gate must stop at least five inches from a wall.
1/4" Clearance from Top of Gate
Non-Pinch
Rollers
1/2" Clearance
Between Gate
and Rollers
Gate
For safety reasons, a physical stop MUST be installed on the gate prior to
installation of the gate operator. This will assure that the gate does not
exceed movement limits and derail while opening or closing fully.
CAUTION
N O T I C E
Non-Pinch
Rollers
Wall
Minimum of 5" Clearance Between
Gate and Wall or Other Object
8
Correct
Gate in Fully
Opened Position