Cleaning Your Machine - Samsung CLX-6210FX Service Manual

CLEANING YOUR MACHINE

To maintain print and scan quality, follow the cleaning procedures below each time the toner cartridge is
replaced or if print and scan quality problems occur.
Cleaning the outside
Clean the cabinet of the machine with a soft lint-free cloth. You can dampen the cloth slightly with water, but
be careful not to let any water drip onto or into the machine.
Cleaning the inside
During the printing process, paper, toner, and dust particles can accumulate inside the machine. This
buildup can cause print quality problems, such as toner specks or smearing. Cleaning the inside of the
machine clears or reduces these problems.
1. Turn the machine off and unplug the power
cord. Wait for the machine to cool down.
2. Using the handle, completely open the front
cover.
3. Grasp the handles on the toner cartridge and
pull to remove the cartridge from the machine.
Service Manual
Alignment & Troubleshooting
4. Press the green release handle to release the
paper transfer belt.
Holding the handle on the paper transfer belt,
lift it out of the machine.
5. With a dry lint-free cloth, wipe away any dust
and spilled toner from the toner cartridges area
and their cavities.
4-23
Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics