Casio TK-800 Operator's Instruction Manual page 18

Getting Started
Required software
The following software is required to use this software. Please confirm that they are installed on the
hard disk of your personal computer
• Microsoft
If any of these software products are not installed on your hard disk, please install them before
installing this software.
Reference: Please refer to the instruction manuals provided with each software for information
regarding installation.
* Operation of this software with Microsoft
2. Connecting the personal computer and register
IMPORTANT:
Make sure to use the RS-232C cable (D-Sub 9-pin female-female) provided when
making this connection.
For safety reasons, connect the cable after first turning off the personal computer
18
.
® Windows ® 3.1 or Microsoft
2
1
® Windows ® 95
® ®
Windows NT has not been verified.
3
.