Throttle Cable Freeplay Adjustment - Yamaha SRX700D Service Manual

THROTTLE CABLE FREEPLAY ADJUSTMENT

a
SDN2220
THROTTLE CABLE FREEPLAY ADJUSTMENT
NOTE:
•
Before adjusting the throttle cable freeplay, the
engine idle speed should be adjusted.
•
Adjust the throttle cable freeplay while the
cable is in the cable guide.
1. Measure:
•
SDN2210
2. Adjust:
•
2
1
Adjustment steps:
•
Loosen the locknut 1.
•
Turn the adjusting nut 2 in or out until the
specified freeplay is obtained.
Turning in → Freeplay is increased.
Turning out → Freeplay is decreased.
•
Tighten the locknut.
NOTE:
After adjusting the freeplay, turn the handlebar to
right and left, and make sure that the engine idling
does not run faster.
2-11
INSP
ADJ
Throttle cable freeplay a
Out of specification → Adjust.
Throttle cable freeplay a:
1.0 ~ 2.0 mm (0.04 ~ 0.08 in)
Throttle cable freeplay