Yamaha DTP901 Service Manual page 33

XP120SD/XP100SD
QQ
3 7 63 1515 0
This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed that basic
service procedures inherent to the industry, and more specifically Yamaha Products, are already known and understood by the users,
and have therefore not been restated.
WARNING :
Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components and failure of the product to perform as specified. For these reasons, we advise
all Yamaha product owners that all service required should be performed by an authorized Yamaha Retailer or the
appointed service representative.
IMPORTANT :
This presentation or sale of this manual to any individual or firm does not constitute authorization certification,
recognition of any applicable technical capabilities, or establish a principal-agent relationship of any form.
The data provided is belived to be accurate and applicable to the unit(s) indicated on the cover. The research engineering, and service
departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable and changes in
specification are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the
distributor's Service Division.
WARNING :
Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated
by grounding yourself to the ground bus in the unit (heavy gauge black wires connect to this bus.)
IMPORTANT :
Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.
WARNING:
This product contains chemicals known to the State of California to cause cancer, or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/
flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food.
WARNING
TE
Components having special characteristics are marked
L 13942296513
originally installed.
印の部品は、安全を維持するために重要な部品です。交換する場合は、安全のために必ず指定の部品をご使用ください。
SPECIFICATIONS（総合仕様）
340 x 85 (H) mm
Size
(Control knob and clamp bolt not
included.)
Weight
Trigger sensor (piezo) x 1, rim switch (2 zones) x 1
Sensor System
Standard stereo phone jack
Output jack
Clamp bolt x 1 (XP100SD only), Stereo phone cable x 1
Accessories
外形寸法
質量
www
センサー方式 トリガーセンサー（圧電素子）× 1、
リムスイッチ（2 ゾーン）× 1
出力端子 標準ステレオフォーンジャック
.
付属品 クランプボルト× 1（XP100SD のみ） 、ステレオフォーンケーブル× 1
2
http://www.xiaoyu163.com
IMPORTANT NOTICE
XP120SD Snare Pad (12")
3.1 kg
XP120SD スネアパッド
φ 340 x 85 (H) mm
3.1 kg
x ao
y
i
8
Q Q
and must be replaced with parts having specifi cation equal to those
3 6 7 1 3
XP100SD Snare Pad (10")
290 x 85 (H) mm
(Control knob and clamp bolt not
included.)
2.4 kg
XP100SD スネアパッド
φ 290 x 85 (H) mm
2.4 kg
u163
.
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
m
co
9 9
2 8 9 9