Kenwood FP905 Manual page 11

KENSTORE™ attachments carousel
(FP920)
Your food processor is supplied with an attachment storage
carousel that fits inside the bowl.
to use the storage carousel
1 Fit the knife blade to the bowl.
2 Then fit the whisk, discs and canopy into the carousel
3 Fit the carousel over the knife blade and place the processor lid
on top .
care & cleaning
G
Always switch off and unplug before cleaning.
G
Handle the blades and cutting discs with care - they are
extremely sharp.
G
Some foods may discolour the plastic. This is perfectly normal
and won't harm the plastic or affect the flavour of your food. Rub
with a cloth dipped in vegetable oil to remove the discolouration.
power unit
G
Wipe with a damp cloth, then dry.
Ensure that the interlock area is
clear of food debris.
G
Store excess cord in the storage
area at the back of the
machine .
.
m u
lt i
p ro
liquidiser/mill
1 Empty the jug/jar before unscrewing it from the blade unit.
2 Wash the jug/jar by hand.
3 Remove and wash the seals
4 Don't touch the sharp blades – brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don't
immerse the blade unit in water.
5 Leave to dry upside down.
twin beater geared whisk
G
Detach the beaters from the drive head by gently pulling them
free. Wash in warm soapy water.
G
Wipe the drive head with a damp cloth, then dry.
Do not immerse the drive head in water.
all other parts
G
Wash by hand, then dry.
G
Alternatively they can be washed on the top rack of your
dishwasher. A short low temperature programme is
recommended.
service & customer care
G
If the cord is damaged it must, for safety reasons, be replaced
by Kenwood or an authorised Kenwood repairer.
If you need help with:
G
Using your machine
G
Servicing or repairs
Contact the shop where you brought the food processor.
8