Document Convention; Camera Cleaning; Preset Data Uploading Or Downloading - Panasonic WV-NS320 Operating Instructions Manual

• Distributing, copying, disassembling, reverse com-
piling, reverse engineering, and also exporting in
violation of export laws of the software provided
with this product, is expressly prohibited.

Document Convention

These operating instructions use the following conven-
tions when describing the uses and operations.
• Windows98 stands
Second Edition.
• Windows2000 stands for Microsoft Windows2000.
• Windows ME stands for Microsoft Windows
Millennium Edition.
• Windows NT stands for Microsoft Windows NT
Workstation 4.0 Service Pack6a.
• Windows XP stands for Microsoft Windows XP.

Camera Cleaning

Even if this function is used, noise may be produced on
the monitor screen, or the preset position may deviate
in case of prolonged use.
In such cases, activate the refresh mode on the special
menu. (See page 37.)
To use this camera with the WJ-SX550C Matrix
Switcher, set the auto cleaning function on each unit,
then clean the WV-NS320/NS324E once a day.
Preset Data Uploading or
Downloading
To download the preset data from the camera to the
controller or upload the downloaded data to the cam-
era, set the following functions to OFF.
Downloading or uploading the data may not work nor-
mally if these functions are set to ON.
• Cleaning (See page 29.)
• Auto mode (See page 27.)
• Self return (See page 27.)
Aim the camera at a motionless object such as a wall if
possible to download or upload the preset data.
Note: Take notice of the following cases when upload-
ing the downloaded data to the camera.
• Preset positions may deviate. If a preset position
has deviated, delete it and set it again correctly.
• You cannot exchange preset data between the
WV-NS320/NS324E and other models.
• Data uploading or downloading is applicable with
Panasonic System Controller only.
for Microsoft Windows98
-5-