J.seat Depth; Seating System; Power Recline Tilt/Lift Operation; Operating Guide - Quickie Xplore 2 Hybrid Owner's Manual

J. SEAT DEPTH
The seat depth can be adjusted in one inch increments on
standard rehab seating.
1. Seat Frame Depth Adjustment
a. To adjust, loosen the two bolts (a & b) of the backrest pivot
plate side on each side of the seat.
b. Reposition the backrest to the desired position.
c. Retighten and retighten bolts on each side of the backrest
pivot plate.
2. Back Angle Adjustment on Seat Frame
a. Remove the front securing bolt (d) on the side of the backrest
pivot plate.
b. Loosen the lower rear bolt (e)
c. Set at desired angle. There are ten holes (in 3º increments)
to choose from.
d. Reinstall the front bolt and tighten both bolts securely.

SEATING SYSTEM

POWER RECLINE TILT/LIFT OPERATION

The power recline, tilt , and lift features on your chair can be
operated using the joystick on your chair. Please refer to the
AMYSYSTEMS user's manual provided with the information
package.
IX. OPERATING GUIDE
A.PERFORMANCE CONTROL SETTINGS
Q-NOTE- Seek advice regarding checking and adjusting
settings. It is vital to match control settings to your level of function
and ability.
Consult your health care professional and your supplier to
select the best control setting for you.
For your safety, have the setting of your chair verified every six
months.
Have your control settings re-adjusted immediately if you
notice any change in your ability to:
• Control the joystick.
• Avoid running into objects.
4.Control Settings can be adjusted by your dealer.
B. THERMAL ROLL-BACK
Your chair has a thermal roll back circuit. This protects the
controller from damage due to overheating. In extreme conditions
(such as repetitive hill climbing) the circuit will decrease the power
to your motors. This allows the chair to operate at a reduced
speed. When the controller cools, the chair will return to normal
speed.
Quickie Xplore 2 Owner's Manual
WARNING
Rev. A
e
d
a b c
17