Console Service Mode - Schwinn 230i Assembly Manual / Owner's Manual

MAINTENANCE
Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is required to do
the necessary tasks.
Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular
maintenance is done. Worn or damaged components must be repaired or replaced immediately. Only manufacturer
supplied components can be used to maintain and repair the equipment.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power
cord from the wall outlet and the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place
the power cord in a secure location.
Before each use, examine the exercise machine for loose, broken, damaged, or worn parts.
Daily:
Do not use if found in this condition. Repair or replace all parts at the first sign of wear or dam-
age. After each workout, use a damp cloth to wipe your machine and Console free of moisture.
Note: Avoid excessive moisture on the Console.
Clean the machine to remove any dust, dirt, or grime from the surfaces. Check for smooth seat
Weekly:
slider operation. If needed, apply a very thin coating of silicone lube to ease operation.
Note: Do not use petroleum based products.
Check pedals and crank arms and tighten as necessary. Make sure all bolts and screws are
Monthly
tight. Tighten as necessary.
or after 20 hours:
NOTICE: Do not clean with a petroleum based solvent or an automotive cleaner. Be sure to keep the Console free
of moisture.
36