Table of Contents
Advertisement
First steps
¤
Insert the rubber headset socket
cover provided to guarantee the
unit is splashproof.
If you need to reopen the battery cover, for instance to change the batteries,
please proceed as follows:
¤
Turn the lock ring or belt clip
anti-clockwise to the end stop
(approx. 20°) and remove.
Position your thumb and index
finger on both sides of the lock
ring.
¤
Insert a suitable tool (e.g. a
small coin) into the cavity at the
top of the battery cover and
twist it until the cover opens.
Placing the handset in the charging cradle
¤
Insert the mains adapter of the charging cradle into the mains socket.
¤
Place the handset in the charging cradle with its display facing forward.
The handset is registered with the base station at the factory. You do not need
to complete a registration. If you wish to use your handset with a different base
station or use further handsets with your base station, you will have to register
the handset manually
To charge the battery, leave the handset in the charging cradle.
Please note
Only place the handset in the charging cradle that is intended for it.
10
¢
page 41.
Advertisement
Table of Contents
