North Star M110800F.4 Owner's Manual page 58

Step 14 – Throttle Cable Setup Cont.
 Lower beam to horizontal position and lock the horizontal latch as
shown

Attach free end of throttle cable to bracket as shown below. Tighten
nuts on cable to secure throttle cable to bracket.
 Attach throttle bracket assembly to beam using (2) Throttle Cable to
Beam Flange Bolts and (2) Throttle Cable to Beam Flange Nut.
 Align bolts in center of slots on throttle bracket. Torque to 21 ft.-lb.
NOTE: Adjust throttle bracket forward or backward for optimal engine
performance.
Fasteners Needed from Parts Bag:
Throttle Cable to Beam
Flange Bolt
Qty 2
Assembly Instructions
Throttle Cable to Beam
Flange Nut
Qty 2
Nut
Throttle Cable
Nuts
58
Tools Needed
 13mm Wrench
2 Needed
 Torque Wrench
Throttle
Cable
Throttle
Bolt
Cable Assembly