11
Top feed stroke
.04.18
Requirement
With the maximum feed stroke set, top feed dog 5 and presser foot 6 should each rise
5.00 mm.
Fig. 11 - 18
Remove the bottom feed dog and the needle.
Unscrew the needle plate, place the metal gauge over the opening of the needle plate
cutout so that both sewing feet can be lowered onto the metal gauge.
Push up lever 1 (nut 2) as far as possible.
Adjust crank 3 (screw 4) so that the top feed dog 5 and presser foot 6 rise the same
distance above the needle plate.
Adjust lever 1 (nut 2) in accordance with the requirement.
on the PFAFF 5625-657/02
1
2
4
3
Adjustment
5
62-014
6
62-015
11 - 19