Windsor SC20 10052190 Operating Instructions Manual page 32

Maintenance
PROBLEM
Little or no solution flow to the floor
No power to machine
Little or no propel (traction model only)
32
CAUSE
Solution tank empty
Solution flow turned off or set too
low
Solution strainer plugged
Solution hoses obstructed
Solution solenoid valve obstructed
or stuck (traction model only)
Battery disconnected
Emergency shut-off activated
(traction model only)
Battery connections corroded
Faulty main contactor
Faulty power switch
Low battery charge
Machine turned on with directional
control button(s) not in neutral
Controller overheated
Loose connection
86400640 Operator's Manual - Saber Compact 20
SOLUTION
Fill solution tank
Turn on or increase flow setting
Clean solution strainer
Clear obstruction from hose
Clean or replace
Check all battery cable connec-
tions
Reset
Clean connections
Replace contactor
Replace switch
Charge batteries
Allow control button to return to
neutral. Restart
Allow cool down period
Check motor wires and connection