Function 3: Display Intensity; Function 4: Unit Output - Leupold RX-1000i Operation Manual

FUNCTION 3: DISPLAY INTENSITY

This mode is used to adjust the brightness of the display,
allowing you to match the intensity to current conditions.
Your RX-1000i has three display intensity settings; low,
medium, and high.
Navigate through the Quick Set Menu by pressing the MODE
button until "DISP" is shown in the lower display. Press and
release the POWER button to toggle between high, medium, and low.

FUNCTION 4: UNIT OUTPUT

This mode is used to choose between yards and meters as
the preferred unit of measure. To choose between yards and
meters, navigate through the Quick Set Menu by pressing the
MODE button until "Unit" is shown in the lower display. Press
and release the POWER button to alternate between yards
and meters.
Units set to Yards (YD)
26