Garmin nuvi 800 series Quick Start Manual page 7

Taking a Detour
1. With a route active, select
Menu.
2. Select
Detour.
If the CUITent route is the only reasonable
option, the ntivi might not calculate a detour.
You can also select specific detours while
navigating a route by using the Prompted
Detour feature. Select Tools> Settings>
avigation > Prompted Detour. While
navigating a route, touch Detour on the
Menu page, and select the detours you'd like
to take.
Adding a Stop (Via Point) to
Your Route
1. With a route active, select
Menu>
Where to?
2. Search for the extra stop (via point).
3. Select
Gol.
4. Select Add
as Via Point
to add this stop
before your destination. Select
Set as
new Destination
to make this your new
final destination.
e
TIP: To add more than one stop, edit the
current route. Select Where to?
>
Routes.
Walking to a Destination
If you are walking to your destination, use
Pedestrian mode to optimize your route for
walking. Select Tools> Settings> System
> Usage Mode> Pedestrian> OK.
Securing Your nuvi
1. Select
Tools> Settings> Security.
2. Select
Garmin Lock.
3. Enter a 4-digit PIN and drive to a security
location.
e
NOTE: [fyou forget your PIN and your
security location, you must send your ntivi
to Garrnin to get it unlocked. You must
also send a val id product registration or
proof of purchase.
Resetting the nuvi
If the nUvi screen stops functioning, tum the
ntivi off and on again. If this does not help,
slide the Power key to the left and hold it
there for a minimum of 8 seconds. The nUvi
should operate nonnally.
You can also remove the battery, and then
reinstall it.