Muratec Multi Functional Printer MFX-C2500 User Manual page 79

MESSAGE MEANING
Not Assigned The speed button or
speed dial number
you tried to use has
no number assigned
to it.
Not Available Can not perform the
task immediately
Try Again Later
because too many
tasks are running at
once.
NonSAMSUNG The color toner
cartridge which the
Toner
arrow indicates is not
a Muratec-genuine
cartridge.
Press OK to toggle
the message to Stop
or Continue.
Stop
One Page is Single page data
exceeds the
Too Large
configured mail size.
Operation You are in the Add
Page/Cancel Job
Not Assigned
operation, but there
are no jobs stored.
Out-Bin Full The output tray of the
machine is full of
paper.
Paper Jam 0 Paper has jammed in
the feeding area of the
Open/Close Door
tray.
Paper has jammed
Paper Jam 1
Open/Close Door inside the machine.
Special print media
Paper Jam 2
Check Inside has jammed in the
paper exit area.
Power Failure Power has turned off
then on and the
machine's memory
has not been back up.
Remove Paper Paper has jammed in
the paper rear cover
in Rear Cover
area.
SUGGESTED
SOLUTIONS
Enter the number
manually using the
number keypad or store
the number or address.
Try again when current
task is completed.
You can select either
Stop or Continue with
the left/right arrow.
If you select Stop by
pressing OK on the
control panel, the
machine stops printing.
If you select Continue,
the machine keeps
printing, but the quality
cannot be guaranteed.
If you do not select any,
the machine will work as
Stop is selected.
Replace the
corresponding toner
cartridge with a
Samsung-genuine
cartridge. See page 65.
Reduce the resolution
and try again.
Check the display to see
if there are any
scheduled jobs.
Remove paper.
Clear the jam. See page
72.
Clear the jam. See page
74.
Clear the jam. See page
75.
The job which you were
trying to do before the
power failure must be
completely re-done.
Clear the jam. See page
75.
MESSAGE MEANING
Refilled Toner The toner cartridge
you have installed is
not genuine or refilled.
Replace Toner This message
appears between
Toner Empty and
Toner Low status.
Replace The life of the part
expires totally.
[xxx]
Replace The life of the part
expires soon.
[xxx] Soon
Retry Redial? The machine is
waiting for a specified
time interval to redial
a previously busy
station.
Reverse Jam 0 Paper has jammed in
the paper fuser area
Check Inside
and In the cover of
reverse unit area.
Reverse Jam 1 Paper has jammed In
the cover of reverse
Check Inside
unit area or in the rear
cover.
Scanner locked The scanner module
is locked
Self Diagnostics The engine in your
machine is checking
Temperature
problems detected.
Self Diagnostics The LSU (Laser
Scanning Unit) in your
LSU
machine is checking
problems detected.
Send Error There is a problem in
SMTP authentication.
(AUTH)
Send Error There is a problem in
DNS.
(DNS)
Send Error There is a problem in
POP3.
(POP3)
Send Error There is a problem in
SMTP.
(SMTP)
SUGGESTED
SOLUTIONS
The print quality may get
poor if the refilled toner
cartridge is installed,
since its characteristics
may significantly differ
from the genuine.
We recommend Muratec
-genuine color
toner cartridge.
Replace the toner
cartridge with a new one.
See page 65.
Replace the part with a
new one. Call for
service.
See page 68 and call for
service.
You can press OK to
immediately redial, or
Stop/Clear to cancel the
redial operation.
Clear the jam. See page
75.
Clear the jam. See page
74.
Unlock the scanner and
press Stop/Clear.
Wait a few minutes.
Wait a few minutes.
Configure the
authentication setting.
Configure the DNS
setting.
Configure the POP3
setting.
Change to the available
server.
Troubleshooting_ 79