Setting The Speaker Impedance - Yamaha RX-V381 Owner's Manual

Setting the speaker impedance

(U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting
6-ohm speakers, set the speaker impedance to "6 Ω MIN".
1
Before connecting speakers, connect the power cable to an AC
wall outlet.
2
While holding down STRAIGHT on the front panel, press z
(power).
z
(power)
STRAIGHT
3
Check that "SP IMP." is displayed on the front display.
CHARGE ENHANCER STEREO TUNED
OUT 1 2
ECO
SP IMP.••8¬MIN
4
Press STRAIGHT to select "6 Ω MIN".
5
Press z (power) to set the unit to standby mode and remove the
power cable from the AC wall outlet.
You are now ready to connect the speakers.
PARTY SLEEP MUTE
ZONE ZONE
2 A 3 B
VOL.
ADAPTIVE DRC VIRTUAL
15
En