Side View - Panasonic WV-SF549 Installation Manual

<Side view>
SD memory card slot
INITIAL SET button
Tilting lock screw
External I/O terminals
Zoom lock knob
Tilting lock screw
About the [INITIAL SET] button
After turning off the power of the camera, turn on the power of the camera while holding down this
button, and wait for around 5 seconds or more without releasing this button. Wait around 2 minutes
after releasing the button. The camera will start up and the settings including the network settings
will be initialized. Do not turn off the power of the camera during the process of initialization. Before
initializing the settings, it is recommended to write down the settings in advance.
16
SF549 SF539
Access indicator (blinking at accessing)
Link indicator (lighting at linking)
Auto focus (AF) button
SD memory card error indicator/
Auto focus indicator
(blinks when adjusting auto focus)
SF549 SF539
Audio output connector
Microphone/line input connector
Network connector
Focus ring
SF548 SF538
SF549 SF539
SF549 SF539