Step 5 - Configure The Modem For Your Country (Global Modem Only); Step 6 - Install Data Communications Software - Multitech MultiModem MT5634ZPX User Manual

Step 5 - Configure the Modem for Your Country (Global
Modem Only)
Different countries have different requirements for how modems must function.
Therefore, before you use your modem, you must configure it to match the defaults of
the country in which you are using it. You can use one of two configuration methods:
Using the Global Wizard to Configure Your Modem
(For Global Modems Only)
The Global Wizard configuration utility is recommended for computers running
Windows95/98/Me/2000/XP.
After completing your hardware and driver installation, if you are using the Global build
of the MT5634ZPX, you must configure your modem for country-specific operation.

Step 6 - Install Data Communications Software

Data communications software is designed to send and receive messages. Multi-Tech
includes PhoneTools communications software with your modem. However, the modem will
work with most data communications software. To install Phone Tools, insert the CD into the
CD-ROM drive; click the Phone Tools icon. You will be asked to choose your language.
The software automatically loads onto your PC.
Multi-Tech Systems, Inc. MT5634ZPX User Guide
Using the Global Wizard to Configure Your Modem
Using AT Commands to Configure Your Modem
1. Insert the MT5634ZPX CD into the CD-ROM drive. The Autorun dialog box
appears.
2. Click Initial Setup and Country Selection.
3. Choose either:
- Run Global Wizard from CD. This will not load the wizard onto your hard
drive, or
- Install Global Wizard on the HD. This will install the wizard onto your
hard drive for future use.
4. The Global Wizard dialog box appears. Click Next.
5. The Global Wizard searches for your modem and identifies it. Click Next.
6. Select the country in which the modem will be used, and then click Next.
7. Review your choice of country. If it is correct, click Next to configure the
modem.
8. When Global Wizard announces that the parameters have been set, click
Finish to exit.
Chapter 4 - Using Your Modem
21