Voice Mail Test; Loopback Test; Speakerphone Test (With Voice Option) - Multitech MultiModem MT5634ZPX-PCI-U User Manual

MultiModemZPX User Guide

Voice Mail Test

Test the MultiModemZPX's voice function by using the included software to set up
the MultiModemZPX for voice mail. Have an acquaintance call and leave a message,
and then play it back.
If your modem does not play sound files in voice mode, go to Windows Control Panel
and double-click the Multimedia icon. Under the Audio tab, select Modem Wave
Driver as your preferred device for both playback and recording, then try again.

Loopback Test

1. Connect a microphone and speaker to the MultiModemZPX. To avoid feedback,
2. Select Start, point to Programs, point to Accessories, and click HyperTerminal.
3. Click Cancel in the Connection Description dialog box.
4. In the HyperTerminal terminal window, type AT&&S and press E
5. Speak into the microphone; you should hear your voice on the speaker or head-
6. Type ATZ and press E

Speakerphone Test (with voice option)

1. Connect a microphone and speaker to the MultiModemZPX.
2. Select Start, point to Programs, point to Accessories, and click HyperTerminal.
3. Click Cancel in the Connection Description dialog box.
4. In the HyperTerminal terminal window, type
5. Speak into the microphone to talk to the person on the other end of the line, and
6. Type +++ATH and press ENTER to hang up.
7. Type ATZ and press ENTER to reset the modem.
make sure the microphone and speaker are well separated; better yet, use a
headphone instead of a speaker.
command causes input from the microphone to be looped back to the speaker.
phone.
NTER
AT+FCLASS=8
AT+VLS=7
ATDTxxxxxxx (for xxxxxxx substitute a telephone number)
listen over the speaker.
to reset the modem.
4 Troubleshooting
. This
NTER
22