Gigaset S820 User Manual page 37

u
Recording of external call: Options
End recording: End Record
Tell the other party that the call is being recorded.
u
You can be notified about new answer machine messages via SMS (
Operating when on the move (remote operation)
Check or activate the answer machine from another telephone (e.g., from a hotel, mobile
phone).
Prerequisites: The current system PIN is set to something other than 0000 (
other telephone has tone dialling (DTMF). Alternatively, you can use a code transmitter (availa-
ble from retailers).
Activating the answer machine
Prerequisite: The answer machine is deactivated.
¤
Call your phone line and let it ring until you hear: "Please enter your PIN code".
¤
Enter the system PIN for your phone within 10 seconds.
Calling the answer machine and playing back messages
Prerequisite: The answer machine is activated.
¤ Call your phone line and press the 9 key while listening to your announcement
system PIN for your phone.
You can operate the answer machine with the keypad.
The following keys are used:
A
During the time stamp playback: 
Go to the previous message.
During message playback:
Go to the start of the current message.
B
Stop playback. Press again to resume.
After a pause of approx. 60 seconds, the connection is ended.
3
Go to the next message.
D
Skip back five seconds in the current message.
0
Delete current message.
:
Change the status of a previously played back message to "new".
Cancelling remote operation
¤
Press the end call key or replace the earpiece.
Please note
The answer machine will terminate the connection under the following circumstances:
u
An incorrect system PIN has been entered.
u
There are no messages on the answer machine.
u
After the remaining memory has been specified.
¤
Record 
Answer machine (Gigaset S820A)
¢
page 47).
¢
page 31) and the
¤
Enter the
35