Changing The System Pin - Gigaset S820 User Manual

Activating/deactivating repeater
The Gigaset repeater can be used to increase the reception range between your Gigaset handset
and the base. To do so, you must activate repeater operation. During activation, calls currently
taking place via the base are cancelled.
Menu key v ¤
Settings menu page
After activating or deactivating the repeater, switch your handset off and on again (
Please note
u
If you are using a repeater, ECO DECT settings (
u
You can register up to 6 Gigaset repeaters.

Changing the system PIN

¤
Menu key v
Settings menu page
current PIN (factory setting: 0000)
Resetting the system PIN
If you have forgotten your system PIN, you can reset it to 0000. If you do this, all the base set-
tings are reset and all the handsets are de-registered!
¤
Remove the power cable from the base.
¤
Press and hold the registration/paging key on the base (
reconnect the power cable to the base. 
¤
Press and hold the registration/paging key for at least 5 seconds.
Restoring the phone to the factory settings
You can reset individual changes to the base and handset separately.
The following are not affected by the reset:
u
Date and time
u
Settings for the configurable page,
u
Registrations of handsets to the base and the current base selection
u
System PIN
u
Entries in the calendar and in the contacts
u
Redial list
u
Stored external and internal destination numbers for the baby phone (Forward alarm to is
reset to External),
u
Destination number for call divert
Resetting the handset (Handset Reset) deletes your audio and display settings.
Resetting the base (Base Reset) resets the settings for ECO DECT, SMS, answer machine, system
settings and the internal names of handsets, and also deletes call/answer machine lists.
Resetting the handset/base
Menu key v ¤
Settings menu page
¤ For Base Reset: Enter the system PIN è
¤ ¤
Ê
System
¢
¤ ¤
Ê
System
¤ ¤
è Enter new system PIN (4 digits; 0 - 9)
¤ ¤
Ê
System
¤
Answer Yes to the security prompt
Changing phone settings
Repeater Mode on/off
page 32) are not available.
¤
Security System PIN
¢
page 2) and at the same time
¤
Resets Handset Reset/Base Reset
¢
page 16).
¤
Enter
¤
è
31