Updating
U, C, R, K, A, B, G, F, L, S, H and J models
● Required Tools
•
USB storage device
•
Firmware
RX-V373/HTR-3065: R0303-xxx.bin
● Preparation
1. Download the latest firmware from the specified
download source to the folder of the PC.
2. Copy the latest firmware from the PC to the root
folder of the USB storage device.
Note: When the latest firmware is copied to a sub-
folder of the USB storage device, the update
will not proceed.
● Operation Procedures
1. Insert the USB storage device to the USB jack.
(Fig. 1)
2. While pressing the "INFO" key, connect the power
cable to the AC outlet. (Fig. 1)
" " (Power) key
" " (電源) キー
U、C、R、K、A、B、G、F、L、S、H、J
● 必要なツール
・ USB フラッシュメモリー
・ ファームウェア
RX-V373 / HTR-3065:R0303-xxx.bin
● 準備
1. 指定のダウンロード先から、最新のファームウェ
アを PC のフォルダへダウンロードしてください。
2. PC から USB フラッシュメモリーのルートフォル
ダへ最新のファームウェアをコピーします。
注意 : 最新のファームウェアをサブフォルダにコピー
● 操作手順
1. USB 端子に USB フラッシュメモリーを差し込みま
す。 (Fig. 1)
2.
セントに接続します。 (Fig. 1)
"INFO" key
INFO キー
USB storage device
USB フラッシュメモリー
Fig. 1
仕向けのアップデート
した場合、書き込みはできません。
INFO キーを押しながら、電源コードを AC コン
USB jack
USB 端子
RX-V373/HTR-3065
23