Plu (Price Look-Up) And Subdepartment Programming - Sharp XE-A303 Instruction Manual

7

PLU (Price Look-Up) and Subdepartment Programming

The PLU function allows speedy key entries whereby a price is automatically called up when a code is entered.
The subdepartment is a kind of "open PLU", which requires you to enter a price after the PLU code is entered. A
maximum of 1800 PLU/subdepartment settings are possible. Each one belongs to a department and acquires
the department's parameters (tax status, SICS and entry digit limit).
The cash register is preprogrammed so all 1800 codes are assigned as positive PLUs associated with
department 1 and preset unit price "0".
• To keep current setting on each programming, press the
guidance message is firstly displayed.
• When pressing the
data you entered before the press of
• When pressing the
the data you entered before pressing the
• When pressing the department,
of procedure except while entering texts or prices, the programming will move to the pressed key
programming.
1. Specify the PLU code.
(1) Enter PLU code using numeric key, and then press
p
the key.
On the upper line of the display, immediately after
displaying the current text data, guidance message
for the next step will be displayed.
On the lower line of the display, the corresponding
PLU code you entered will be displayed.
2. Text programming
:
(1) Press key to enter text programming.
On the upper line of the display, immediately after
displaying guidance message, the current text data
will be displayed.
On the lower line of the display, the character code
corresponding to the first character of the text data
will be displayed.
(2) Enter an item name.
A maximum of 16 characters can be entered.
Please refer to "Guidance for text programming" on
page 13 for entering the item name.
When you start entering a character, the current
text data will be overwritten by new data.
S
Use the and
text data.
P
Pressing the
the right and left respectively.
22
A
key in the middle of procedure, the programming will terminate and the
l
key twice in the middle of procedure, the programming will terminate and
-
s
(Press to skip
B
keys to delete unnecessary
@
and key moves the cursor to
A
is saved.
l
key twice is NOT saved.
% & V r R
, , , , ,
Key operation
A
. / Press to terminate.)
MELON
s
key when the corresponding
X Y c b
, , , or
Operator display
p
PLU.0071
71
0071
ENTER[00]KEY
0071
:
ENTER TEXT
0071
PLU.0071
0071
MELON
S S S
0071
key in the middle
0.00
0.00
0.00
080
_
032