Special Fax Modes - Sharp MX-FXX1 Quick Reference Manual

SPECIAL FAX MODES

The special modes make it possible to perform a variety of fax transmissions for specific purposes.
The following pages show the types of fax transmissions that can be performed. (The procedures for using each
special mode are not explained.)
Each special mode has its own settings and procedures, however, the basic procedure is the same for all modes.
The basic procedure for selecting a special mode is explained on the next page using "Erase" as an example.
For the specific procedures for using the special modes, see "7. CONVENIENT FUNCTIONS" in the
Facsimile Guide.
Special modes
Ready to send.
Scan Send
Fax
Mode Switch
Auto
A4
Image
Settings
Memory TX
Direct TX
Auto Reception
Fax Memory:100%
1st screen
Fax
Special Modes
Program Erase
2in1
Timer
3rd screen
Fax
Special Modes
Job
Mixed Size
Build
Original
File Quick File
When a special mode key encircled by
When any other special mode key is touched, a setting screen appears to let you select settings for that mode.
The keys that appear vary by country and region and the peripheral devices that are installed.
Speaker
Resend
Address Book
Sub Address
Special Modes
File
Quick File
OK
1/3
Dual Page
Scan
Card Shot
OK
3/3
Slow Scan
Mode
is touched, the key is highlighted and the setting is completed.
To use a special mode, open the special modes
menu and touch the key of mode that you wish to
use. The menu consists of three screens. Use the
keys to switch through the screens.
Touch the [Special Modes] key in the base screen to
open the special modes menu. You can also open
the special modes menu by touching the [Special
Modes] key that appears after the [Image Settings]
key is touched.
2nd screen
Fax
Special Modes
Transaction
Report
Polling
Memory Box
OK
2/3
Own Name
Select
17